Configuration of WinRM

In this tutorial we will go through configuration of WinRM which is necessary for using WinRM connector It will cover configuration which we tested on multiple servers together with our connector. It cover just the basic stuff and if you want to study more about this topic you can use official documentation or 3rd party tutorials which will go deeper.

WinRM or Windows remote management, is a remote management protocol that uses Simple Object Access Protocol to interface with remote computers and servers, as well as Operating Systems and applications. WinRM is a command-line tool.

Test-WSMan

The output should be following:

If you get some error then you need to do the quick default configuration

Now execute the first command again and it should without error now.

Display WinRM listener. It will show useful information about port, address, … where WinRM is listening for incoming connections. After quick config you will probably see only one listener for HTTP.

winrm e winrm/config/listener

Display current winrm configuration

winrm get winrm/config

Show SDDL setting, this command will show dialog window

winrm configSDDL default

You can configure trusted host which will be able to connect. If you don't want to specify this use

winrm set winrm/config/client '@{TrustedHosts="*"}'

We can use several methods for authentication.

• Basic - the second command will allow unencrypted data transfer, so it's not recommended to use it with HTTP. For some testing purpose it's ok.

winrm set winrm/config/service/auth '@{Basic="true"}'
winrm set winrm/config/service '@{AllowUnencrypted="true"}'

• NTLM

winrm set winrm/config/service/auth '@{Negotiate="true"}'

• Kerberos

winrm set winrm/config/service/auth '@{Kerberos="true"}'

• CredSSP

winrm set winrm/config/service/auth '@{CredSSP="true"}'
winrm set winrm/config/client/auth '@{CredSSP="true"}'
Enable-WSManCredSSP -Role Server

If you want to use user which is not admin then we need a more configuration. If you want to use admin user you should ready to go even without it.

Now we need to set the right permissions. It's tested against NTLM, Kerberos and CredSSP auth It's tested with local user + group and with domain user + group. For the following steps you can use one of these groups WinRMRemoteWMIUsers__ or Remote Management Users It should work with both.

Assign user into group

Set WMI access for group.

• Computer Management → Services and Application → right click WMI Control → Properties
• In new dialog window → tab Security → Root → CIMV2 and click button Security
• Next dialog window will appear - you need to add group here
• You need to select these options in the checkboxes - Execute Methods, Enable Account and Remote Enable
• Click on Advanced - select and edit group → Set "Applies to" This namespace and subnamespaces
• Confirm all changes in dialog windows and close them

Set SDDL

• winrm configSDDL default

• Add group and give it Full Control
• Confirm changes

Restart WinRM

Restart-Service winrm

When you need to check if WinRM is ready for connection but you don't have access to the Windows server to check the configuration yourself use this tips.

Check if port is open and ready to connection, default ports are 5985 (HTTP) and 5986 (HTTPS): Linux

nc -vz HOST PORT

Windows

Test-WSMan -ComputerName HOST
or
Test-netConnection HOST -Port PORT

Now we know if we are able to connect to the WinRM port. In case the port is not accessible it can be probably blocked in firewall.

Next we want to try to connect to WinRM. Install pywinrm follow only the first part of installation, we don't need to install connector server. Open terminal (Linux) or powershell (Windows)

> python
>>> import winrm
>>> s = winrm.Session('http://HOST:5985/wsman', auth=('USER', 'PASS'), transport='ntlm')
>>> r = s.run_ps('Write-Host connection test OK')
>>> r

For connecting via HTTPS use this lane. The difference is in URL where we need to use https and port 5986. Then we are using one more argument where we specify path to trust store

>>> s = winrm.Session('https://HOST:5986/wsman', auth=(HOST, PASS), transport='ntlm', ca_trust_path='/etc/ssl/certs/CRT.pem')

Then, execute the winrm call. Followin call simply instructs the remote powershell to echo "connection test OK". If there some errors or warnings during the call, the python REPL will display them.

r = s.run_ps('Write-Host connection test OK')

The fact that there were some stacktraces printed does not necessarily mean the call failed.

Now simply print the result by calling r. After executing ryou should see something like this (note the "connection test OK" string is there):

Can be caused by:

• wrong username or password
• user is not in correct user group on the Windows system

Can be caused by:

• wrong username or password
• WinRM SDDL is not configured

If you get this error when you trying to use CredSSP over HTTPS connection, the problem can be that there is configured certificate thumbprint directly in winrm/config/service.

class 'requests_credssp.exceptions.AuthenticationException'>("Server did not response with a CredSSP token after step Step 1. TLS Handshake - actual ''",)

Execute this command to delete CertificateThumbprint value from the config/service.

winrm set winrm/config/service '@{CertificateThumbprint=""}'

The configuration of certificate thumbprint in the Listener should remain there.

When calling WinRM over HTTPS, you can encounter following error:

Traceback (most recent call last):
  File "/usr/lib/python2.7/site-packages/OpenSSL/SSL.py", line 309, in wrapper
    _lib.X509_up_ref(x509)
AttributeError: 'module' object has no attribute 'X509_up_ref'

This seems to be caused by older versions of the cryptography python library. Upgrading the library should solve the problem. Since this library is also used by some OS components, we recommend to upgrade it locally only for the user who runs python winrm scripts.

This affects only requests-ntlm library and therefore only NTLM authentication. It does not seem to affect the overall function but the warning is at least an annoyance. When you see the warning:

/usr/lib/python2.7/site-packages/requests_ntlm/requests_ntlm.py:200: NoCertificateRetrievedWarning: Requests is running with a non urllib3 backend, cannot retrieve server certificate for CBT
  NoCertificateRetrievedWarning)

You can confirm the behavior by:

1. Installing requests-ntlm locally for the user.
2. Editing ~/.local/lib/python2.7/site-packages/requests\_ntlm/requests\_ntlm.py and changing the import from requests.packages.urllib3.response import HTTPResponse to from requests.packages.urllib3 import HTTPResponse.
3. When running winrm script with NTLM, the warning should no longer pop up.

The best case is to use HTTPS connection to connect to WinRM. To achieve this we need to do some more configuration on the server and on the client. We need to create HTTPS listener and for this we will need some certificate. In this tutorial we will cover setting up WinRM with self signed certificate. The configuration will be same if we want to use some other certificate, so if you already have certificate you can skip the part where we are generating one.

The tested way to generate self signed certificate on linux via tutorial which can be found here you should follow whole process except the part with finals steps because for our purpose we don't need to import it to browsers.

Now we have certificate which is imported in our windows server and now we can configure the HTTP listener

winrm create winrm/config/Listener?Address=*+Transport=HTTPS '@{Hostname="HOSTNAME"; CertificateThumbprint="THUMBPRINT"}'
for deleting
winrm delete winrm/config/Listener?Address=*+Transport=HTTPS

Restart WinRM

Restart-Service winrm

Next step is to validate if we can connect to HTTPS listener so follow instruction in section debug and validate if HTTPS port is accessible. Before we try to execute some powershell command via WinRM we need to import this certificate into client trust store and pass the path to this store as parameter - see debug section